Taper lock bushing for taper bore pulley



Applicable Industries:
Building Material Shops, Manufacturing Plant, Retail
Place of Origin:
Brand Name:
Model Number:
cast iron or C45 steel, GG22-25 cast iron, C45 steel
surface processing:
Black oxide
metric and inch

—————————– HOW TO INSTALL AND REMOVE ————————–

1) Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes(each comeplete hole will be threaded on one side only).

2) Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.

3) Make sure bush is free in hub. Slip assembly onto shaft and locate in the desired position.

4) Tighten screws alternately and evenly until all are pulled up tightly(See table for torque settings)).

5) Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. Repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.

1) Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.

2) Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers.

3) Tighten screws alternately until bush is loosened in hub and then remove the coplete assembly. If bush does not loosen immediately tap on hub.

As one of the leading pulley bushing manufacturers, mechanical product suppliers and exporters, we supply pulley bushing and many other products for cluster pulley bushing. pulley bushing, pulley bushing Manufacturer, pulley bushing Supplier, pulley bushing Exporter, pulley bushing Seller, pulley bushing Made In China, Wholesale pulley bushing, Buy pulley bushing, Customize pulley bushing – Find pulley bushing Manufacturers and Suppliers. Choose from quality pulley bushing manufacturers, suppliers and exporters on pulleybushing.com.