China wholesaler Custom Industry Polyurethane Rubber Conveyor Teeth Timing Synchronous Pulley pulley belt

Product Description

PU Flex Timing Belt/PU Truly Endless Timing Belt
*Polyurethane belt loop power,by a unique thermoset molding process.
*High-quality polyurethane material resistant to wear the belt and tear tesistant proper ties.
*One of the core wire to increase belt strength,tensile stregth,so that the belt has good dimensional stability.
*Polyurethane power ring with small tolerances,can guarantee the accuracy of thickness and length.
*All of the above features make the ployurethane ring has a higher power with the physical and chemical stability.
Polyurethane belt has the following properties:
*Mechanical properties                                                                *Chemical properties
 Positive fit,synchronous,running                                                   Resistant to aging,water solution,UVUVA,anti-ozne
 Constant length,no post-elongation                                              Working temperature:-30ºC-80ºC(short time could 
 Low noise                                                                                      withstand 110ºC)
 Wear resistant                                                                               Resistant against simple oils,fats and petrol
 Low-maintenance                                                                          Resistant to some acids
 Highly flexible
 Belt speeds up to 80m/s

This round PU timing belt especially             
suitable for low load synchronous transmission,
such as:office automation system and household appliances.

Related Belt

1.Ring belt from the continuous steel core and the thermoplastic polyurethane material,is a real no interface ring belt.
2.Ring belt to ensure the features and operation under high load,this power transmission belt for high-speed and high load transfer.
3.Ring belt length may be from 1.700 to 22.000 meters.
4.Ring belt can be customized according to customer’s specifications of different models,such as:AT20,AT10,T10,T5,AT5,HTD8M,STD8M…..
*Ring belt special processing:
  1.Tooth surface and nylon fabric
  2.Can be rolled back a special pattern grinding and drilling
  3.can cover the back of the belt thicking
About opening belt
*Opening belt finished with a continuous length,the middle and the sides parallel to the wire core.Standard roll length is 50 or 100 meters.
*Open (PU) leather belt with a variety of different core option,such as kevlar core,highly flexible core(HF)high-performance(HP)and high toughness(HPF)
*Production tolerance of small reliable transmission and has a dimensional stability.The production process or in the teeth and tooth add a layer of nylon to ensure that applications running in the special characterstics of the same.Also thicker layer of polyurethane in the belt or the back of the red plastic to prevent corrosion or high load.

Model List
*Kinds of model to choose
MXL

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
26MXL 33 36MXL 45 37MXL 46 38MXL 48 41MXL 51 46MXL 58 53MXL 66 54MXL 67
55MXL 70 56MXL 71 57MXL 72 58MXL 73 59MXL 74 60MXL 75 61MXL 76 63MXL 79
64MXL 82 65MXL 83 71MXL 89 72MXL 90 73MXL 92 74MXL 93 75MXL 95 76MXL 96
77MXL 97 78MXL 98 80MXL 100 81MXL  102   82MXL 103 84MXL 105 85MXL 106 86MXL 107
87MXL 110 88MXL 112 89MXL 114 92MXL 115 93MXL 119 94MXL 120 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL 125 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL 140 114MXL 143 115MXL 144 116MXL 145 120MXL 150 122MXL 153 124MXL 155 
126MXL 157 128MXL 160 132MXL 165 140MXL 175 143MXL 179 144MXL 180 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL 190 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL 200
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL 500

T10 

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
T10*260 26 T10*300 30 T10*330 33 T10*370 37 T10*390 39 T10*400 40 T10*410 41 T10*440 44
T10*450 45 T10*460 46 T10*480 48 T10*500 50 T10*510 51 T10*530 53 T10*540 54 T10*550 55
T10*560 56 T10*600 60 T10*610 61 T10*620 62 T10*630 63 T10*650 65 T10*660 66 T10*680 68
T10*690 69 T10*700 70 T10*720 72 T10*730 73 T10*750 75 T10*780 78 T10*800 80 T10*810 81
T10*830 83 T10*840 84 T10*850 85 T10*860 86 T10*880 88 T10*890 89 T10*900 90 T10*910 91
T10*920 92 T10*950 95 T10*960 96 T10*970 97 T10*980 98 T10*1000 100 T10*1571 101 T10*1050 105
T10*1080 108 T10*1100 110 T10*1110 111 T10*1140 114 T10*1150 115 T10*1200 120 T10*1210 121 T10*1240 124
T10*1250 125 T10*1260 126 T10*1280 128 T10*1300 130 T10*1320 132 T10*1350 135 T10*1360 136 T10*1390 139
T10*1400 140 T10*1410 141 T10*1420 142 T10*1440 144 T10*1450 145 T10*1460 146 T10*1500 150 T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 160 T10*1640 164 T10*1700 170 T10*1750 175 T10*1760 176 T10*1780 178
T10*1800 180 T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 200 T10*2571 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

H

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
200H 40 225H 45 250H 50 260H 52 270H 54 280H 56 300H 60 315H 63 330H 66
350H 70 390H 78 420H 84 450H 90 460H 92 470H 94 480H 96 510H 102 540H 108
560H 112 570H 114 600H 120 630H 126 700H 140 750H 150 900H 180        

 T2.5

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
T2.5*120 48 T2.5*145 58 T2.5*160 64 T2.5*180 72 T2.5*182.5 73 T2.5*200 80 T2.5*215 86 T2.5*240 96
T2.5*245 98 T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.5*420 168 T2.5*500 200 T2.5*600 240
T2.5*650 260 T2.5*780 312 T2.5*950 380                    

AT5

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
AT5*375 75 AT5*390 78 AT5*455 91 AT5*490 98 AT5*500 100

AT10

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
AT10*500 50 AT10*600 60 AT10*660 66 AT10*700 70 AT10*730 73 AT10*780 78 AT10*800 800 AT10*840 84
AT10*920 92 AT10*960 96 AT10*980 98 AT10*1050 105 AT10*1080 108 AT10*1100 110 AT10*1150 115 AT10*1200 120
AT10*1210 121 AT10*1250 125 AT10*1280 128 AT10*1300 130 AT10*1350 135 AT1390 139 AT10*1400 140 AT10*1480 148
AT10*1600 160 AT10*1700 170 AT10*1860 186 AT10*1900 190                

S3M

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
S3M120 40 S3M144 48 S3M150 50 S3M183 61 S3M192 64 S3M201 67 S3M210 70 S3M231 77
S3M237 79 S3M246 82 S3M315 105 S3M357 119 S3M418 140 S3M420 140 S3M432 144 S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 170 S3M513 171 S3M519 173 S3M525 175
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 200 S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

HTD3M

Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Teeth
3M135 45 3M144 48 3M171 57 3M174 58 3M177 59 3M189 63 3M195 65 3M207 69
3M225 75 3M228 76 3M243 81 3M255 85 3M264 88 3M276 92 3M288 96 3M294 98
3M300 100 3M312 104 3M315 105 3M324 108 3M336 112 3M345 115 3M357 119 3M360 120
3M366 122 3M375 125 3M384 128 3M402 134 3M420 140 3M423 141 3M435 145 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 165 3M504 168
3M510 170 3M522 174 3M525 175 3M537 179 3M540 180 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

*We also have model :L/XL/XXL/T5/AT3/H/PK/PJ/PH/DMB/DT5/DR/PL/MB/DAT10/DT10/S2M/S5M/5M/HTD2M/HTD5M/HTD14M/HTD8M,or as your requirment to make new model but need to pay model cost,If you have no quantity,noted please!

Application 

About company
ZheJiang CZPT Transmission Equipment Co.,Ltd. 
Was established in March 2004,have 16 years of production experience.Local in No. 11, Lane 243, Jiugan Road, Sijing Town, Xihu (West Lake) Dis. District, ZheJiang ,China.Main deal in transmission belt and modular chain belt etc.production quantity more than 50000 pieces 1 year.all kinds of rubber material,pvc and pu material etc.accept specical making as your requirment. We support custom service.and delivery time most fastest 1day according  to your orders.Companies adhering to the “integrity,quality,price,and service first,continuous innovation” business philosophy,dedicated to provide high quality products and high-quality service for the customer,the company continutes to expand the scale of development,customers throughout the country.

If you have interested,free time to contact me please.

 
 

    
 

Certification: CE
Pulley Sizes: Custom
Manufacturing Process: Casting
Material: Alloy
Surface Treatment: Custom
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pulley

Calculate the ideal mechanical advantage of pulleys

The basic equations for pulleys can be found in this article. It will also cover the different types of pulleys, the ideal mechanical advantages of pulleys, and some common uses of pulley systems. Read on to learn more! After all, a pulley is a simple mechanical device that changes the direction of a force. Learn more about pulleys and their common uses in engineering.

pulley basic equation

Pulleys work the same way as gravity, so they should withstand similar forces. Newton’s laws of motion can be used to calculate the forces in a pulley system. The second law of motion applies to forces and accelerations. Similar to this is Newton’s third law, which states that the directions of forces are equal and opposite. The fourth law dictates the direction of force. The Fifth Law states that tension is in equilibrium with gravity.
A pulley is a simple mechanism that transmits force by changing direction. They are generally considered to have negligible mass and friction, but this is only an approximation. Pulleys have different uses, from sailboats to farms and large construction cranes. In fact, they are the most versatile mechanisms in any system. Some of their most common applications and equations are listed below.
For example, consider two masses m. Those of mass m will be connected by pulleys. The static friction coefficient of the left stop is ms1, and the static friction coefficient of the right stop is ms2. A no-slip equation will contain multiple inequalities. If the two blocks are considered to be connected by a pulley, the coefficient of kinetic friction is mk. In other words, the weight of each block carries the same mass, but in the opposite direction.

Types of pulleys

A pulley is a device used to pull and push objects. Pulley systems are ropes, cables, belts or chains. The “drive pulley” is attached to the shaft and moves the driven pulley. They are available in a variety of sizes, and the larger they are, the higher the speed of power transmission. Alternatively, use small pulleys for smaller applications.
Two-wheel pulleys have two mechanical advantages. The greater the mechanical advantage, the less force is required to move the object. More wheels lift more weight, but smaller pulleys require less force. In a two-wheel pulley system, the rope is wound around two axles and a fixed surface. As you pull on the rope, the shafts above slowly come together.
Compound pulleys have two or more rope segments that are pulled up on the load. The mechanical advantage of compound pulleys depends on the number of rope segments and how they are arranged. This type of pulley can increase the force by changing the direction of the rope segment. There are two main types of pulleys. Composite pulleys are most commonly used in construction. The ideal mechanical advantage of pulleys is 2 or more.
Construction pulleys are a basic type. They are usually attached to wheel rails and can be lifted to great heights. Combinations of axes are also common. Construction pulleys can be raised to great heights to access materials or equipment. When used in construction, these pulleys are usually made of heavy materials such as wood or metal. They are secured with ropes or chains.

The ideal mechanical advantage of pulleys

The pulley system is a highly complex system with high mechanical advantages. Use a single pulley system to reduce the force required to lift an object by cutting it in half. The mechanical advantage increases as you add more pulleys, such as six or seven. To calculate the mechanical advantage of a pulley system, you need to count the number of rope segments between the pulleys. If the free end of the rope is facing down, don’t count it. If it’s facing up, count. Once you have your number, add it up.
The required mechanical advantage of a pulley is the number of rope segments it has to pull the load. The more rope segments, the lower the force. Therefore, the more rope segments the pulley has, the lower the force. If the rope segments are four, then the ideal mechanical advantage is four. In this case, the composite pulley quadrupled the load force.
The ideal mechanical advantage of a pulley system is the sum of the mechanical force and the force required to lift the load at its output. Typically, a single pulley system uses two ropes, and the mechanical force required to lift the load is multiplied by the two ropes. For a multi-pulley system, the number of ropes will vary, but the total energy requirement will remain the same. The friction between the rope and pulley increases the force and energy required to lift the load, so the mechanical advantage diminishes over time.
pulley

Common uses of pulley systems

A pulley system is a simple mechanical device typically used to lift heavy objects. It consists of a rotating wheel attached to a fixed shaft and a rope attached to it. When the wheel moves, the force applied by the operator is multiplied by the speed of the pulley, and the force is multiplied by the weight of the object being lifted. Common uses for pulley systems include pulling, lifting, and moving heavy objects.
The oil and petroleum industries use pulley systems in a variety of applications. Most commonly, pulleys are used in drilling operations and they are installed on top of the rig to guide the cable. The cable itself is attached to two pulleys suspended in the derrick, where they provide mechanical energy to the cable. Using a pulley system in this application provides the force needed to move the cable safely and smoothly.
The main advantage of the pulley system is that it minimizes the force required to lift an object. The force used to lift the object is multiplied by the desired mechanical advantage. The more rope segments, the lower the force required. On the other hand, a compound pulley system can have many segments. Therefore, a compound pulley system can increase the force a worker can exert on an object.
Safety Precautions to Take When Working on Pulley Systems

There are many safety precautions that should be observed when working on a pulley system. The first is to wear proper protective gear. This includes hard hats that protect you from falling objects. Also, gloves may be required. You should limit the amount of movement in the penalty area, and you should also keep the area free of unnecessary people and objects. Also, remember to wear a hard hat when working on the pulley system.
Another important safety precaution when working on a pulley system is to check the Safe Working Load (SWL) of the pulley before attaching anything. This will help you understand the maximum weight the pulley can hold. Also, consider the angle and height of the pulley system. Always use safety anchors and always remember to wear a hat when working on a pulley system.
Safe use of chain hoists requires training and experience. It is important to read the manufacturer’s manual and follow all safety precautions. If you’re not sure, you can actually inspect the hoist and look for signs of damage or tampering. Look for certifications for sprocket sets and other lifting accessories. Look for the Safe Working Load (SWL) marking on the chain hoist.
pulley

Example of a pulley system

Pulley systems are often used to lift items. It allows you to reduce the effort to lift and move the load by applying force in one direction. Pulley systems can be built and modeled to fit any type of project. This resource focuses on pulley systems and is designed to support the new GCSEs in Engineering, Design and Technology. There are also many examples of pulley systems suitable for various applications.
In the study, participants who read easy text took longer to manipulate the pulley system than those who read challenging text. In general, this suggests that participants with prior scientific experience used their cognitive abilities more effectively. Additionally, students who read simple texts spent less time planning the pulley system and more time on other tasks. However, the study did show that the time required to plan the pulley system was similar between the two groups.
In everyday life, pulley systems are used to lift various objects. Flagpoles are one of many pulley systems used to raise and lower flagpoles. They can also be used to raise and lower garage doors. Likewise, rock climbers use pulleys to help them ascend and descend. The pulley system can also be used to extend the ladder.

China wholesaler Custom Industry Polyurethane Rubber Conveyor Teeth Timing Synchronous Pulley   pulley belt	China wholesaler Custom Industry Polyurethane Rubber Conveyor Teeth Timing Synchronous Pulley   pulley belt
editor by CX

2023-05-15

pulley bushing

As one of leading pulley bushing manufacturers, suppliers and exporters of mechanical products, We offer pulley bushing and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pulley bushing

Recent Posts